[QUOTE="LeadnSteel"]
hello;
i have a dislay problem. i was getting a long beep and 2 short on start up, no display. i checked card to see if it was dirty, and it wasnt so i took it in to the local computer store. guy there said my card was dead, told me the onboard display should work but i had disabled. he took the battery out, i put it back in when i got home, turned pc on but still the same 1 long beep 2 short but there is no card in right now im just trying to use my on board temporrly. anyone know what is going on??
neatfeatguy
You should check the manual next time - if you don't have one, you can find them online. According to the MB manual (for the motherboard you have listed in your sig), it states the following about beeps for your motherboard:
One continuous beep followed by two short beeps, a pause, then repeats - No Memory Detected
One continuous beep followed by three short beeps, a pause, then repeats - No VGA Detected
Your issue appears to be that your RAM is dead (one or more sticks - if you have multiple sticks of RAM) OR the DIMM slots that the RAM is connected to are dead OR maybe the RAM is loose and not seated tightly anymore.
So, whatever computer place you took your PC to, they're retarded....or maybe some kind of catastrophic failure happened and a lot of stuff died in your computer tower and they just didn't troubleshoot the issue any further.
well they tested another card and it posted properly while i was watching. I checked my ram sticks and tried switching, using only 1, reseatting them but still have the same beep sequence. also i have a new system no and my motherboard s a gigabyte ga z77x ud3h
Log in to comment